Mast inclination

the mast tilt angle refers to the Hand pallet jacks unloaded on a flat solid ground, mast vertical position relative to its maximum tilt forward or backward. Anteversion's role is to facilitate the loading and unloading fork to take place the goods; after dip role is when the forklift with freight line to prevent the cargo from slipping off the forks. Usually before the Hand stacker inclination 3 ° ~ 6 °, after the angle is 10 ° ~ 12 °. The maximum lifting speed: Truck maximum lifting speed usually refers to when the truck loaded with cargo lifting the maximum speed in m / min (m / min), respectively. Increasing the maximum lifting speed, can improve operational efficiency, but lifting too fast, prone to cargo damage and engine damage accident. Currently the largest forklift hoisting speed has been increased to 20m / min.

Load center

 Load center refers to fork placed on standard goods, its center of gravity arrival horizontal cross section of the front wall of the vertical distance T, in mm (millimeters). For 1T to 4T reach trucks specified load center distance 500mm.the maximum lifting height: maximum lifting height refers on a flat solid ground, the truck loaded with goods rose to the highest position, the upper surface of the horizontal section of the fork hydraulic hand truck from where the vertical distance from the ground level.

Technical parameters

Technical parameters forklift is used to indicate the structural features and performance of the liftstar. The main technical parameters are: rated capacity, the load Center distance, the maximum lifting height, mast tilt, maximum speed, minimum turning radius, the minimum ground clearance and wheelbase, track width and the like.Lifting capacity: forklift truck nominal weight refers to the distance between the center of gravity of goods to the fork of the front wall of the load center when the distance is not greater than, the maximum allowable weight lifting goods to T (t), respectively. When the center of gravity of the cargo on the fork exceeds a predetermined load center distance when, due to longitudinal stability of the truck, from the weight should be reduced accordingly.

weight should be reduced accordingly

Electric Hand Pallet Jacks is used to indicate the structural features and performance of the truck. The main technical parameters are: rated capacity, the load
Center distance, the maximum lifting height, mast tilt, maximum speed, minimum turning radius, the minimum ground clearance and wheelbase, hydraulic hand truck and the like，Lifting capacity: forklift nominal weight refers to the distance between the center of gravity of goods to the fork of the front wall of the load center when the distance is not greater than, the maximum allowable weight lifting goods to T (t), respectively. When the center of gravity of the cargo on the fork exceeds a predetermined load center distance when, due to longitudinal stability of the truck, from the weight should be reduced accordingly.

Forklift Valve main parts

Valve: Valve points two intake valves and exhaust doors, its role is to open and close the intake and exhaust passages, which consists of a head and a stem portion composition. Head for opening and closing the intake and exhaust passage, the valve stem portion is used to guide the movement. Ordinary steel intake valves and exhaust valves are made of heat-resistant alloy, because the exhaust valve head in direct contact with the combustion gases, heat seriously

arm length and function of what kind of requirements

Fixed slewing work positioners jib crane can help you prepare and unproductive work shorten production time and reduce unnecessary waiting. Kellett company jib crane specification, all varieties, whether you are lifting weights, rotation angle, arm length and function of what kind of requirements, we can provide you with the best solution, even we have with dual spin arm, telescopic crane lift table jib, etc..